Ladder Shield


The "Ladder" shield consists of dual skin shielding media attached to both sides of a ladder frame to provide maximum protection in areas where personnel may come into contact with the shield, such as Stair tower and Derrick areas.

Robust construction - primary radiant shielding incorporates heavy duty woven mesh for maximum heat flux reduction.

Key Features

  • Independently tested up to 60 kW/m2
  • Heat flux reduction in excess of 80% at 150 mm distance behind the shield.
  • Rolled Hollow section framework gives high resistance to wind buffeting.
  • All stainless steel type 316L construction.
  • Able to withstand continuous thermal cycling.
  • Excellent light transmission and ventilation.
  • Good protection against wind and snow.
  • Quick on site installation and removal, supplied complete with all necessary A4 Stainless Steel fasteners.
  • Mesh proven to reduce wind speed by over 70%
  • Load tested to 24 kN/m2

Single Skin Ladder Shield: Wind Speed Reduction Test Results

Free Flow
Wind Speed
Speed Recorded
Behind Shield
Total Reduction
in Speed
Percentage
Reduction
Max
Deflection
(mph)(mph)(mph)(%)(mm)
55262952.714
60352541.720
65362944.626
70363448.633
75383749.335
80384252.538

Double Skin Ladder Shield: Wind Speed Reduction Test Results

Free Flow
Wind Speed
Speed Recorded
Behind Shield
Total Reduction
in Speed
Percentage
Reduction
Max
Deflection
(mph)(mph)(mph)(%)(mm)
55154072.718
6018427023
65204569.231
70205071.433
75235269.335
80225872.536

Tabulated values are extracted from Test Report No. R11918

On completion of the wind speed test the shields were fully inspected and no evidence of damage was identified.

Click to download the PDF Data Sheet for Locker Ladder Heat Shield.

Scroll to top