Open post
Navigation Aid Solar Panel Windshield - ConocoPhillips

ConocoPhillips

ConocoPhillips Navigation Aids


Navigation Aid Solar Panel Windshield - ConocoPhillips
Navigation Aid Solar Panel Windshield - ConocoPhillips
ConocoPhillips
ConocoPhillips
previous arrow
next arrow

About the Project


Galebreaker fabric Windshields are installed on numerous North Sea installations.

The Fabric Wind Shields were attached to the rear of the Navigation Aid Solar panel skids for protection against high winds acting on the rear of the structure.

Key features of Galebreaker fabric windshield:

  • Temperature range -30 °C to +70 °C (-22 °F to +158 °F)
  • Wind load design up to 120 mph (53 m/s, 104 knots)
  • 75 % Wind speed reduction
  • Total weight 1.25 kg/m² (0.256 lb/ft²)
  • Fixes to your existing structure – no drilling or welding required
  • High UV and abrasion resistance

Shield types used in this project

Open post
Offshore windshielding on a drilling rig

Apexindo Tasha

Apexindo Tasha Drilling Rig


Apexindo Tash drilling rig
Apexindo Tash drilling rig
Apexindo Tash drilling rig
Apexindo Tash drilling rig
Apexindo Tash drilling rig
Apexindo Tash drilling rig
Apexindo Tash drilling rig
Apexindo Tash drilling rig
Apexinndo-Tasha-6-s
Apexinndo-Tasha-17-min
Apexinndo-Tasha-10-min
Apexinndo-Tasha-6-min
previous arrow
next arrow
Apexinndo-Tasha-6-s
Apexinndo-Tasha-17-min
Apexinndo-Tasha-10-min
Apexinndo-Tasha-6-min
previous arrow
next arrow

About the Project


Galebreaker fabric heatshields installed on the Apexindo Tasha drilling rig.

The Fabric Heatshields were installed along the front of the access ladder platforms and around the access ladders from the Monkey Board up to the Crown Block.

Shield types used in this project

Open post
Hakuryu 10

Hakuryu 10

Hakuryu 10, Singapore


Hakuryu 10
Hakuryu 10
previous arrow
next arrow

About the Project


Galebreaker Industrial Fabric Heat Shielding installed at Hakuryu 10 rig, Singapore for client K2 Velosi.

25 shields were fitted, covering an area of 1,100 square metres. The average panel size used was 42.8 sqm. Installation was straight-forward due to the quality of the sub-frame built by the client.

Shield types used in this project

Open post

South Sea’s Inspection

South Sea's Inspection, Singapore


South Sea's Inspection
South Sea's Inspection
previous arrow
next arrow

About the Project


Installation of Galebreaker Industrial fabric Heat Shields on two sides of the derrick above and below the monkey board.

In total 24 fabric Heat Shields were fitted to cover an overall area of 900 square metres at South Sea's Inspection, Singapore.

Shield types used in this project

Open post

Ensco 72

Ensco 72, Rotterdam


Ensco 72
Ensco 72
previous arrow
next arrow

About the Project


Galebreaker fabric Wind Shielding fitted to all 4 sides of the derrick, Ensco 72, Rotterdam.

The overall area of 1100m2 of Galebreaker Wind Shielding was designed, manufactured and supplied within client's specified timescales.

Shield types used in this project

Scroll to top