+44 (0)1925 406614 sales@heatshielding.com FacebookTwitter

Open post

BP Scheihallion FPSO

BP Scheilhallion FPSO


previous arrow
next arrow
previous arrownext arrow
Slider

About the Project


Locker 'Mini' Type Heatshields are used to fully enclose the turret structure to protect the area from the Radiant heat produced from the forward mounted Flare Tower.

Open post
Hakuryu 10

Hakuryu 10

Hakuryu 10, Singapore


previous arrownext arrow
Slider

About the Project


Galebreaker Industrial Fabric Heat Shielding installed at Hakuryu 10 rig, Singapore for client K2 Velosi.

25 shields were fitted, covering an area of 1,100 square metres. The average panel size used was 42.8 sqm. Installation was straight-forward due to the quality of the sub-frame built by the client.

Open post

Odjfeld Drilling

Odjfeld Drilling


previous arrow
next arrow
previous arrownext arrow
Slider

About the Project


The images above show the Single Skin Ladder type Derrick Ladder Heatshields and an external view of Ladder shields, protecting the internal staircase and drilling equipment.

Open post

South Sea’s Inspection

South Sea's Inspection, Singapore


previous arrownext arrow
Slider

About the Project


Installation of Galebreaker Industrial fabric Heat Shields on two sides of the derrick above and below the monkey board.

In total 24 fabric Heat Shields were fitted to cover an overall area of 900 square metres at South Sea's Inspection, Singapore.

Open post

Ensco 104

Ensco 104, Darwin, Australia


previous arrownext arrow
Slider

About the Project


Galebreaker Industrial Fabric Heat Shielding installed at Ensco 104, Darwin, Australia.

A total of 88 shields were fitted to all four sides of the derrick covering an area of 455 square metres.

Open post

FPSO Capixaba

FPSO Capixaba, Brazil


previous arrow
next arrow
previous arrownext arrow
Slider

About the Project


The FPSO Capixaba is currently on the Cachalote Field offshore Brazil.

Formerly on the Golfinho field, it was taken off station and refurbished to suit the new location.

Locker Heatshielding were commissioned by Single Buoy Moorings Inc. in 2005 to provide radiant Heatshields for the turret area of the FPSO Capixaba for its new offshore Brazil position.

Single Skin Ladder type Heatshields were installed on the side of the FPSO turret area. They protect both the electrical control cabinets and personnel accessing these areas, from the effects of radiant heat during flaring off of waste hydrocarbons.

The Single Ladder Heatshields were used in this location for their excellent radiant heat reduction capabilities, along with the inherent strength, visibility and ventilation they provide.

Click to download PDF Project Sheet: FPSO Capixaba.

Open post

FPSO KIKEH Malaysia

FPSO KIKEH, Malaysia


previous arrow
next arrow
previous arrownext arrow
Slider

About the Project


The FPSO Kikeh is currently located 120km northwest of the island of Labuan, offshore Sabah, East Malaysia in water depths of around 1,300m.

The FPSO is operated by Murphy Sabah Oil Company on behalf of Partner Petronas Carigali. Locker Heatshielding were commissioned by Single Buoy Moorings Inc. in 2007 to provide radiant Heatshields for the external turret area of the FPSO.

At the time of construction the vessel had the largest external turret to date and was the first Malaysian FPSO in the SBM fleet.

Deliverables


Single Skin Ladder type Heatshields were installed on the front face of the FPSO turret area facing towards the flare boom as well as around the crown block area including the roof area.

The Heatshields are used to protect both personnel and key equipment from the effects of radiant heat from the flaring of excess hydrocarbons. The Single Skin Ladder Heatshields were used in this location for their excellent radiant heat reduction capabilities, along with the inherent strength, visibility and ventilation they provide along with the ability to span large distances.

Open post

Forties Alpha Platform

Forties Alpha Platform, UK - North Sea


previous arrow
next arrow
previous arrownext arrow
Slider

About the Project


The UK North Sea Forties field underwent a major refurbishment in 2007. The offshore flare platforms required replacing as they had been in situ since installation of the platforms in 1976.

Locker Heatshielding were contracted by Amec to provide replacement Heatshield panels for the Forties Alpha flare platform to protect the Flare deck structure from elevated temperatures.

Due to the relatively complex shape of the replacement flare platforms, the Heatshield panels had to be individually designed with a number of complex shapes incorporated. The flare deck shields also had to fit closely around the new flare tip pipes to prevent any ingress of radiant heat through the flare deck.

The replacement flare platform was built on the quayside in Aberdeen and the shields fitted before the entire structure was transported offsite.

The existing flare platform was then removed, and the new platform lifted into place as a complete unit, significantly reducing the installation downtime.

Click to download PDF Project Sheet: Forties Alpha Platform.

Open post

Rowan Gorilla V

Rowan Gorilla V, UK - North Sea


previous arrow
next arrow
previous arrownext arrow
Slider

About the Project


Mini Type Heatshields were attached to pre-fabricated support structures which were then lifted into place and attached to the Derrick structure.

Open post

Kupe Gas Onshore Facility (Technip Oceania)

Kupe Gas Onshore Facility (Technip Oceania), New Zealand


previous arrow
next arrow
previous arrownext arrow
Slider

About the Project


Locker Heatshielding Ltd were contacted by Technip Oceania in 2008 to assist with protection of flare gas supply pipework and flare air ducting located at the Kupe Gas onshore terminal. These flares are positioned in a specially designed burn pit to prevent damage to any surrounding infrastructure.

Due to the horizontal orientation of the flare tips, the Heatshields had to provide full protection to both the equipment and support structure, as there could be a tendency for the flares to blow back in the direction of the Heatshield wall. The shields also needed to fit in close proximity to the flare tip piping without affecting performance.

The Locker Single Skin Ladder was selected, as it provides 150mm standoff from the supporting structure and greater protection against the flare and radiant heat produced.

A key benefit of Locker Heatshields is that they can easily be shaped to fit around practically any shape and size, providing greater flexibility for challenging onshore and offshore projects such as this.

The Kupe natural gas field is located in the Tasman Sea, 30km off the coast of Manaia in Taranaki, New Zealand. The field was discovered in 1986 and is located in 35m of water. The production facility comprises an unmanned offshore platform, a 30km single 3 phase pipeline to shore and an onshore production station.

Click to download PDF Project Sheet: Kupe Gas Onshore Facility.

Posts navigation

1 2 3
Scroll to top